 |
 |
 |
 |
 |
|||||||
 |
 |
|
|||||||||
 |
 |
 |
 |
 |
 |
    |
 |
|
 
|
Society and Industry News
Participate in the Young Members Group Mentors Program in Orlando
> Read More Society & Industry News
Published on March 06, 2010 SVC Recognizes 2010 TechCon Sponsors Published on January 14, 2010 Exhibit at the SVC TechCon in Orlando Published on January 12, 2010 Written by Randall Sherman - Printed Circuit Design & Fab Written by Randall Sherman Printed Circuit Design & Fab This field involves thin films , coatings and inks that perform electrical functions (conducting, semiconducting, insulating, etc. ... source Google | Published on March 09, 2010 New York Construction Experts Say There Are Many Benefits To Installing High ... - OfficialWire (press release) OfficialWire (press release) New York Construction Experts Say There Are Many Benefits To Installing High ... OfficialWire (press release) According to Chiesi, new glazings with low-solar-gain, low-E coatings not only reduce solar heat gain significantly, they do so with a minimal loss of ... and more » source Google | Published on March 09, 2010 New Energy Advances Engineering & Fabrication of Commercial-Scale Prototype ... - MarketWatch (press release) New Energy Advances Engineering & Fabrication of Commercial-Scale Prototype ... MarketWatch (press release) These solar coatings are less than 1/10th the thickness of ' thin' films and make use of the world's smallest functional solar cells, shown to successfully ... and more » source Google | Published on March 09, 2010 Four professors named 2010 MacVicar Faculty Fellows - MIT News Four professors named 2010 MacVicar Faculty Fellows MIT News Hosoi's principal fields of interest are free surface flows, thin films , surface tension, particle-laden flows and complex fluids. ... source Google | Published on March 09, 2010 Thin Film Solar Cells Supplied by Miasole - AZoCleantech Thin Film Solar Cells Supplied by Miasole AZoCleantech The company produces various solar products that are produced with a combination of CIGS thin films with Miasole proprietary manufacturing processes. ... TheStockWizards.net: News and Technical Analysis Update for March 8th 2010 ... Trading Markets (press release) all 24 news articles » source Google | Published on March 08, 2010 |
Recent Forum Posts
Upcoming Coatings Seminar in Minneapolis [b]COATING PROCESS FUNDAMENTALS SHORT COURSE[/b] June 8-10, 2010; University of Minnesota; Minneapolis, MN This course provides coating engineers and their colleagues with an understanding of the principles of the many processes by which liquid coatings are applied and solidified. The course i RE: ion source use life Hi Rudy, what kind of ion source is it? If its a linear ion source with a metal based anode / cathode then they can sputter quickly. We use a carbon based anode and cathode that sputters at a low rate as the sputter yield of carbon is so low compared to metals. This gives a very long life-time. Derm RE: Physics of Thermal Evaporation There are many factors which will have an effect on the grain size of Aluminum films. You did not indicate why you require this condition. The application will possibly change some of or add to the following: My experiences in making high Ultraviolet reflecting, low scatter Aluminum films have show RE: seeking high reflectance coating I am not sure if you have found the company to help you. Please let us know if you have related coating service later. Hellen www.jh-vac.com Thickness measurment question. What are the methods of measuring the thickness of an Aluminum film on a surface? I have been told that you can measure thickness using a four point ohms meter, where would I find information on this method? Much appreciated, JKO RE: Physics of Thermal Evaporation Hello, I would suggest that if you are making the coating in a coating machine of average vacuum levels that the following practices may help you. Heat the glass to around 100 C to drive off water, methane and other stuff adsorbed onto the surface. If you are doing this in a bell jar, use a shutt Physics of Thermal Evaporation I would like some help understanding the parameters that determine the grain size of an thermally evaporated Al film deposited on a glass substrate. For example, how does the chamber pressure, deposition rate, source to substrate distance, source temperature, and substrate surface temperature affect Biocompatibility Does anyone have experience with the bio-compatibility of vacuum metalized coated parts? second hand metallizer we are looking for a second hand metallizer up 1600mm if there is any please contact or giving the details. > Read More Forum Posts |