Career Openings

Job openings are listed in the order received by SVC. For information on placing a position available here please see Post Career Openings – SVC Advertising.

SVC is providing this information as a service to the vacuum coating industry. SVC is not responsible in any way for the accuracy of the information provided.

Yeagle Technology, Inc
140 Nott Highway
Ashford, CT 06278

Immediate Full Time Position
Electromechanical Assembler / Field Service

Demonstrate skills in:
• Install and repair High Vacuum equipment
• Safety, hand tool and meter use
• Technology-related mathematics, reading, writing, vocabulary and science
• Circuit interpretation, design and construction
• Motor control design use and troubleshooting
• The ability to use test equipment to measure electrical and mechanical variables
• Sound safety practices
• Construction and diagnostic repair of DC motors, AC motors, motor controls, hydraulics and pneumatic devices and equipment
• Knowledge of the National Electrical Code
• Motor controls, hydraulics, pneumatics and electrical theories
• Troubleshooting, part nomenclature, interpretation and application of schematics, and proper service techniques
• Demonstrate analytical skills needed to verify or troubleshoot low- and high-voltage wiring
• Must have strong reasoning, problem solving, and organizational skills.
• Must be able to perform as a team member with little or no supervision.
• Ability to read blueprints and manuals to properly service equipment.
• Must be knowledgeable of current industry standards and be able to adapt standards to work performed.
• Good working knowledge of electrical and high vacuum systems.
• Must be able to communicate well with customers via email, fax, and phone and offer technical advice as needed.
• Performance of on-site building maintenance and minor motor vehicle repairs as necessary.
• Requires the use of electronic, mechanical, vacuum, computer diagnostics to perform troubleshooting, failure diagnoses and calibration on PVD equipment and support components I.E. QCM, Vacuum gauges, power supplies, FC controller, flow switches and I/O cards.
• System startup and customer training during the startups.
• Requires some travel.
• Other duties and assigned.

Minimum Qualifications:
• Two years technical school, community college, trade school, Vacuum Tech, Electronics or Military tech schooling with relevant electrical/mechanical background.
• Proficient with Microsoft Word, Excel
• Minimum of 4 years experience in systems maintenance.
• Must possess a valid driver’s license. Must be insurable with no major infractions. Job will require periodic travel.
• Self-motivated and ability to work independently, as well as in a team atmosphere.
• Good customer relationship skills are mandatory.
• Basic machining skills
• Basic Knowledge of leak detection equipment & techniques
• Knowledge of electrical connection/disconnection and troubleshooting.
• Good working knowledge of electronics and compliance with current industry standards.
• Understanding of schematics, drawings using various test equipment & math calculating to confirm design setup
• Excellent references.
• Ability to push, pull, bend, twist, stand, squat for long periods of time and to lift a minimum of 10 to 50 pounds of force on a daily basis.

PRIMARY FUNCTION: To plan, direct, and coordinate the manufacturing engineering activities for thin film coatings manufacturing with designated supplier(s). Responsible for all aspects of the manufacturing engineering, including the continuous improvement, productivity and quality improvement, capacity planning and new product (colors) development. Responsible for the maintenance procedures, equipment and support capital and development plan including the planning and installation of all new equipment or maintenance related installations.
ORGANIZATIONAL RELATIONSHIPS

• Develops and maintains a strategic plan for the thin film production process that supports the business plan(s). Communicates with operations these requirements and assures the operating plans incorporate all necessary upgrades to support the business.

• Monitors operating conditions and manufacturing effectiveness through production reporting, and interaction with Supplier Management Team (Production Control, Process Engineering, Maintenance, Materials/Logistics and Purchasing). Suggests and drives changes to more desirable conditions or levels of operation to improve production efficiency and effectiveness.

• Responsible for the productivity improvement and quality improvement needed to support the goals of the business unit. Develops processes for new color/finishes as required by the business group. Monitors changes in the industry and evaluates new processes and trends in thin film technology to maintain competitive level of the thin film production process.

• Work with supplier management team to implement improvements in process. Coordinate efforts with production supervisors for all major equipment installations. Monitor the production output to achieve maximum effectiveness through the proper coordination of manpower, equipment, and materials.

• Works closely with supplier management team (Production Planning) to establish the most effective machine-loading plan and capacity planning to support the business groups.

• Provides expertise to the line organization in the development of standards of performance in all areas of process and equipment control.

• Drives and monitors various programs that lead to improved quality, lower costs, increased productivity and efficiencies.

• Works closely with Quality assurance to correct quality problems and to assure compliance to quality standards and procedures set forth by QA.

• Ensures the safe and proper operation of equipment, and compliance with established Timex procedures throughout the manufacturing operation of the supplier.

• Maintain technical expertise with material coatings such as TiN, TiCN, TiO, TiAlN, ZrN, ZrCN, etc. Work with outside vendors to develop new innovative coatings and improved processing methods.

• Follows and ensures compliance with applicable laws and regulations issued by country and local regulatory agencies.

• Bachelors degree required (technical discipline), and MBA preferred. A degree in chemistry or physics desirable.

• Three to five years of physical vapor deposition (PVD) experience required, with experience in thin film decorative coatings preferred.

• Must have excellent verbal and written communication skills. Organizational skills are essential.

• This position is based in China; ex pat assignment available for the right candidate

Candidate should submit their resumes via email to sboyer@timex.com. No phone calls please.

Chroma Technology Corp
An Employee Owned Company
10 Imtec Lane, PO Box 489
Rockingham, Vermont 05101

Job Title: Design Engineer

Job Summary: Thin-film interference coating and filter design. Development of manufacturing processes for thin-film coatings. Develops primarily UV, VIS and NIR coatings and provides technical assistance as needed.

Responsibilities:
·      Design optical thin-film filters and coatings
·      Develops construction instructions for custom products
·      Develop manufacturing processes for thin-film coatings, including assisting in the installation of new coating processes and the development of procedures for operation and maintenance
·      Assist in the development quality control standards and procedures for all phases of production
·      Assists in troubleshooting filter performance problems, and provide technical assistance to customers in the design and layout of new instruments
·     Assist in troubleshooting coating equipment problems
·      Provides technical assistance and information to all departments
·      Assists Application Engineers to choose optimum filters and coatings for instruments of current and potential customers (including infrequent direct contact with customers)
·      Continuously improves filter and coating designs, and design methodologies + technologies
·      Balances a) cost against b) performance against c) ability to manufacture and uses this information to create most efficient filter designs. Often suggests solutions to original inquiry to arrive at better solution.
·      Researches and develops coatings for specific applications
·      Develops and improves deposition process and capabilities

Additional Responsibilities for all Employee Owners:
·     Maintains quality service by following organization standards and working closely with all other employees to ensure highest quality

·     Strategize and work toward the long-term prosperity of the business

·     Encourage innovation and tenure in the workplace, recognizing these as the best ways of servicing the customers with the products and service they need and want

·     Work cooperatively and independently, accepting share of responsibility for Chroma’s operation, and when or wherever possible, go beyond individual duties

·     Make creative contributions, regardless of job or task. Encourage cooperation and innovation through teamwork.

·     Be involved in the decision making process and show concern for the company’s overall health. View Chroma as much more than just a job.

·     Attend company meetings for discussion on decision making.

Qualifications:
·     B.S. in optics, applied physics, materials science or similar technical discipline or equivalent experience
·     Experience in applications engineering in related field or in product development and optical design
·     Technical aptitude with mathematical inclination
·     Good problem visualization skills
·     Self directed and detail oriented with ability to multi-task
·     Technical writing skills a plus
·     Excellent interpersonal skills
·     3+ years UV to NIR coating design preferred
·     Customer service experience a plus

Candidates should submit their resume via email to: hr@chroma.com. No phone calls please.

The above statements are intended to describe the general nature and level of work to be performed. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required.

Responsibilities:
The successful candidate will be responsible for development projects involving the design of processes in sputtering, converting, and new applicable technologies, such as PECVD, CVD and polymer vapor deposition. The candidate must be able to successfully transfer those processes to production. The candidate will be expected to statistically determine process limits and capabilities. The candidate will be expected to become proficient in the theory and operation of all production equipment and will be expected to drive the design and/or modification of lab and production scale equipment when required. The candidate needs to be hands-on, action-oriented and a self-starter.

Education:
Minimum of a BS in Physics, Chemistry, or Engineering or equivalent. Experience in PVD is desired as well as web handling and converting experience. A polymer chemistry background and knowledge of CVD is also a plus. The candidate must demonstrate a strong mechanical aptitude. Training in SPC, DOE, and data analysis would be beneficial. At least three years of professional experience is required.

Only candidates legally authorized to work in the United States should apply.

Interested parties should submit resumes to: Lynn_Schreiner@beminc.com

Techni-Met, Inc. is a subsidiary of Williams Advanced Materials

PVD Process/Manufacturing Engineer

The Graduate Technology Group has an opening for a process engineer in the manufacturing of chrome plated plastic parts using physical vapor deposition (PVD and PECVD) methods.

The successful candidate will have performed hands-on processing tasks for reactive sputtering of chrome on plastic substrates and demonstrated the ability to develop complex procedures for operating PVD/PECVD systems. He/she will be familiar with other manufacturing steps and equipment such as dip coating, and inspection techniques for chrome plated parts. He/she must be a practitioner of statistical analysis methods for monitoring process control. He/she must be able to effectively work on a number of simultaneous tasks within a dynamic team environment. He/she must be willing to work flexible hours depending on the work load.

Responsibilities:
· Improve and maintain manufacturing equipment including:
· Batch sputtering / PVD systems .
· Sampling and analysis of thin metal coatings.
· Monitor critical factors and interpret data associated with the process and final product to optimize production yield and product performance.
· Troubleshoot process and equipment problems.
· Support research and manufacturing process related projects.
· Provide technical hands-on guidance to technicians and operators.
· Drive yield improvement, cycle time reduction, and quality improvement initiatives
· Communicate equipment, operation, process control issues to the engineering and / or research and development staff.
· Assist in the planning routine preventive maintenance and calibration of equipment (PVD systems, gas sensors, changing hazardous gas cylinders and other daily maintenance).

Requirements:
· B.Sc. or MS degree in Chemistry, Materials Science, Engineering or related field with 5 or more years of relevant experience.
· Hands-on experience with equipment such as PVD systems and continuous processes.
· Good observational skills, close attention to detail, and ability to identify process and equipment problems.
· Demonstrated ability to analyze problems and implement solutions in manufacturing environment.
· Experience in production, development, manufacturing and engineering techniques (DoE, Six-Sigma, Lean Manufacturing, etc.)
· Team experience in a production environment.
· Ability to work both independently and as a team member.
· Excellent communication skills.
· Thorough and detail oriented work attitude.

Send your resume or inquires to job@clearplas.us

The Graduate Technology Group is an Equal Opportunity Employer

Posted 6/20/2008

Product Marketing Manager

Specialty Mat. & Converting NA
Performance Films Division
Schererville, Indiana

Key Job Responsibilities:
Responsible for product and marketing for Automotive & Metalure product lines driving profitable growth. This includes understanding the value chains, market trends, and customers’ needs to identify new product and market opportunities. Work with R & D to develop products, and work with operations personnel to successfully commercialize these opportunities.

Depending on the experience of the candidate, the person will report into one of the Senior Market Managers or directly into the Marketing & Sales Director.

Position Requirements:
Support and manage product and marketing responsibilities for existing product portfolio focusing on product differentiation, pricing, channels to market, planning, forecasting, sales support, market benchmarking, marketing communications, and sales and marketing information systems.

· Identify and drive cost reduction efforts to meet customer needs and business profitability objectives.
· Utilize market research and competitive analysis to identify new product and market projects focusing on differentiation, market share and profitable growth.
· Work with marketing communication resource to execute promotion and communication support strategy.
· Support capital expansion ramp up (e.g. C11, M2 and finishing) working closely with operations, process engineering, quality and R&D.
· Reporting: monthly and quarterly reporting, on product mix metrics (e.g. volume, margin), new product development priority updates, and budgeting.
· Develop the implementation plans and execute to capitalize on the opportunity you have identified.
· Travel required 20%
· B.S. in technical or business discipline
· MBA preferred
· Five years of product management experience
· Automotive or Coatings Industry experience required
· Strong interpersonal skills, including effective communication style with various internal and external audiences
· Proven track record in product management with measurable results
· Ambitious and potential to grow

Qualified candidates can apply to the position via our career website at www.averydennison.apply2jobs.com and selecting reference number SMCNSCH3491 from the drop down menu.

Posted 6/4/2008

PVD Process/Manufacturing Engineer – 2G Buffer

American Superconductor Corporation has an opening for a process engineer in the manufacturing of ceramic thin films using physical vapor deposition (PVD) methods. The epitaxial films are deposited on metallic substrates for the fabrication of high temperature superconductor wires by reel-to-reel processing.

The successful candidate will have performed hands-on processing tasks for reactive sputtering multi-layer ceramic thin films and demonstrated the ability to develop complex procedures for operating PVD systems. He/she will be familiar with other manufacturing steps and equipment such as annealing, furnaces, and inspection techniques for epitaxial films. He/she must be a practitioner of statistical analysis methods for monitoring process control. He/she must be able to effectively work on a number of simultaneous tasks within a dynamic team environment. He/she must be willing to work flexible hours depending on the work load.

Responsibilities:

· Improve and maintain manufacturing equipment including:

o Reel-to-reel PVD systems and annealing furnaces.

o Sampling and analysis of thin metal foil and films.

· Monitor critical factors and interpret data associated with the process and final product to optimize production yield and product performance.

· Troubleshoot process and equipment problems.

· Support research and manufacturing process related projects.

· Provide technical hands-on guidance to technicians and operators.

· Drive yield improvement, cycle time reduction, and quality improvement initiatives

· Communicate equipment, operation, process control issues to the engineering and / or research and development staff.

· Assist in the planning routine preventive maintenance and calibration of equipment (PVD systems, gas sensors, changing hazardous gas cylinders and other daily furnace maintenance).

Requirements:

· B.Sc. or MS degree in Chemistry, Materials Science, Engineering or related field with 5 or more years of relevant experience.

· Hands-on experience with equipment such as PVD systems, controlled atmosphere furnaces, web handling and continuous processes.

· Good observational skills, close attention to detail, and ability to identify process and equipment problems.

· Demonstrated ability to analyze problems and implement solutions in manufacturing environment.

· Experience with analytical techniques such as XRD, SEM, interferometry, etc.

· Experience in production, development, manufacturing and engineering techniques (DoE, Six-Sigma, Lean Manufacturing, etc.)

· Team experience in a production environment.

· Ability to work both independently and as a team member.

· Excellent communication skills.

· Thorough and detail oriented work attitude.

American Superconductor is an Equal Opportunity Employer

www.amsc.com

Posted 6/03/08

Sr Process Engineer

Multek Flexible Circuits, Inc., is a leading global developer and manufacturer of advanced laminates and high-performance flexible circuit materials. Join us in our easily accessible, Northfield, MN location - just minutes from the metro area. Here you'll work with experienced, forward-thinking professionals, supporting technically advanced processes in a stimulating work environment. You'll challenge our growing company to achieve even more than we already have, make a real impact.

This position will have technical leadership responsibility for the development and support of vacuum deposited processes with the Specialty Materials business unit. Representative job duties include: Roll to roll vacuum coating of ITO, copper, nichrome, aluminum, gold and silver by sputtering, thermal and electron beam evaporation. Responsible for process development and continuous improvement that meets timing, reliability, quality and cost targets from concept through volume production; developing FMEA, control plans and writing of technical documents; perform maintenance on vacuum chambers and related equipment; install new equipment on existing vacuum machines; participate and lead teams as required; perform related duties as assigned.

The individual who joins our dynamic growth-oriented organization will have a Bachelor’s degree in Engineering, Materials Science or other technical discipline with five years’ experience in vacuum technology, vacuum deposition and web handling. Additional requirements include knowledge, skill and ability in the following areas: statistical tools; systematic problem solving methods; quality systems; material manufacturing processes. The successful candidate will possess superior organizational, project management, communication, problem solving, leadership and team skills. Must have the ability and willingness to travel internationally.

To learn more about your company go to www.sheldahl.com

Please submit resumes to nfdhumanresources@multek.com

Posted 6/03/08

Tru Vue, Inc. in Faribault, MN, is seeking a motivated Product Development Engineer to join our team to design and execute projects to create the next series of Optical Thin Film Coatings. Tru Vue produces high volume large-scale anti-reflective, UV absorbing, and other films on glass, acrylic, and plastics. We have earned market leadership through the breadth and quality of value-added product offerings and our marketing organization. We seek similar diversity and quality in our team members!

We are a subsidiary of Apogee Enterprises, Inc. (apog.com), which has once again been named among the Top 100 Corporate Citizens by Business Ethics Magazine.

Product Development Engineer

Primary responsibility is the design and execution of mid and large sized projects to meet business objectives while enhancing product features, reducing costs, and maintaining and improving systems and procedures under the direction of a Product Engineering Manager. Most projects will operate under DFSS, and other established procedures.

Required Education and Experience:

• BS Degree plus 3-5 years related experience. Preferred degrees: chemistry, chemical engineering, physics, or materials science. Preferred experience: technology, equipment or product development, substantially in vacuum or thin film coating.

• Basic knowledge of mechanical and electrical systems

• Knowledge of vacuum theory, systems and hardware, including demonstrated application and hands-on ability.

• Familiarity and previous use of DOE and Six Sigma tools

• Proficiency with Microsoft Office, internet, e-mail, spreadsheets

Preferred Experience:

Optical modeling and coating design

Record of successful on-time, on-budget project completions

Pay Range: $60-75,000/year, limited relocation assistance available

We are an Equal Opportunity and Affirmative Action employer. Please apply in person at our Faribault facility or on-line at www.tru-vue.com. Applications by other means cannot be accepted.

Posted 6/03/08

Other Career Opportunities in the vacuum industry can be viewed on the Association of Vacuum Equipment Manufacturers (AVEM) Web Site.